Model C End Seal
Calpico Model C End Seals are a seamless, slip-on boot style. They are made from 1/8” thick synthetic neoprene rubber and come provided with two stainless steel bands and clamps. This type of end seal is applied while pulling the carrier though the casing. This model is designed for easy installation and will also fit any carrier-casing combination where unusual lateral movement can be expected.
Durometer | 60 +/- 5 |
---|---|
Average Tensile | -1 |
Average Elongation | 350% |
Temperature Limits | -20 to 212 F |
Color | Black |
Finish | Smooth |
Polymer Content | 20% |
Specific Gravity | 1 |
Model V Special End Seal
Calpico Model V Special End Seals are a split wrap-around style. They are made of 1/8” Styrene Butadiene Rubber (SBR) and come provided with two stainless steel bands and clamps.
Thickness | 1450 psi |
---|---|
Elongation | 250% |
Hardness | Duro A 70 +/- 5 |
Heat Resistance | 70 hrs @ 212 F ASTM D-573 |
Compression Set | 22 hrs @ 158 F ASTM D-395 |
Model W End Seal
Calpico Model W End Seals are a split wrap-around style. This model is preferred because the seal can be applied after the pipe is pulled through the casing, and ensures a better fit because it can be adjusted to variables in coating thickness of pipe. Permanent adhesive, butyl mastic strips, bond the two exposed edges into one permanent seal. Just press each exposed edge together. These end seals are made of 1/8” thick flexible coal tar reinforced with fiberglass providing an extra tough waterproof membrane. Provided with two stainless steel bands and clamps. Not recommended for use under pressure. For pressure applications, use Calpico Pipe Linx.
Thickness | 70 mm |
---|---|
Elongation | Ultimate |
Permeance | 0.002 |
Puncture Resistance | 225 lbs average |
Pliability | Passes |